This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification reflects the role of individuals who perform a range of routine tasks relating to replacing, fitting, installing and adjusting automotive accessories in the automotive service and repair industry and carry out work according to Australian Design Rules (ADR) compliance and Vehicle Standard Bulletin (VSB) requirements.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
-
Financial help
-
Government funding is available for this course. Check your eligibility for:
*To be eligible for this funding, you have to do a traineeship.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
To see how government funding could help to reduce the cost of your course, check your eligibility for funding.
-
-
On-the-job training
- Completing this course through a traineeship can help you to learn the skills you need.
This traineeship is available:
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Through traineeship:
1 year - Qualification only:
6 months – 1 year
- Through traineeship:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Apply knowledge of automotive electrical circuits and wiring systems | Core |
| Follow environmental and sustainability best practice in an automotive workplace | Core |
| Follow safe working practices in an automotive workplace | Core |
| Install basic ancillary electrical systems and components | Core |
| Install external vehicle equipment | Core |
| Remove, inspect and refit light vehicle wheel and tyre assemblies | Core |
| Replace and refit steering, suspension and braking system components | Core |
| Use and maintain tools and equipment in an automotive workplace | Core |
| Apply infection prevention and control procedures to own work activities | Elective |
| Apply knowledge of Advanced Driver Assistance Systems (ADAS) | Elective |
| Apply sales procedures in an automotive workplace | Elective |
| Assemble and fit braking system components | Elective |
| Balance wheels and tyres | Elective |
| Carry out non-structural vehicle panel repairs | Elective |
| Carry out paint-less dent repairs on vehicle body panels | Elective |
| Communicate business information in an automotive workplace | Elective |
| Communicate effectively in an automotive workplace | Elective |
| Control stock | Elective |
| Fabricate and install automotive and marine frames, canopies and side curtains | Elective |
| Follow point-of-sale procedures | Elective |
| Inspect and service braking systems | Elective |
| Inspect and service steering systems | Elective |
| Inspect and service suspension systems | Elective |
| Install ancillary electronic systems and components | Elective |
| Install automotive security systems and components | Elective |
| Install in-vehicle entertainment and convenience | Elective |
| Install marine electrical systems and components | Elective |
| Install vehicle lighting and wiring systems | Elective |
| Install vehicle sunroofs | Elective |
| Plan and apply time management | Elective |
| Read and apply vehicle wiring schematics and drawings | Elective |
| Read and respond to automotive workplace information | Elective |
| Remove and refit vehicle batteries | Elective |
| Remove and replace automotive and marine interior trim components | Elective |
| Remove and tag steering, suspension and braking system components | Elective |
| Remove, replace and align bolt-on vehicle body panels and components | Elective |
| Respond to customer needs and enquiries in an automotive workplace | Elective |
| Scan and calibrate Advanced Driver Assistance Systems (ADAS) | Elective |
| Select and install performance enhanced suspension system products | Elective |
| Select light vehicle wheels and tyres | Elective |
| Shift materials safely using manual handling methods | Elective |
| Test and repair basic electrical circuits | Elective |
| Test vehicle components for correct operation | Elective |
| Test, charge and replace batteries and jump-start vehicles | Elective |
| Use and maintain measuring equipment in an automotive workplace | Elective |
| Work effectively with others in an automotive workplace | Elective |
| Work in a team | Elective |
Job prospects
The Certificate II in Automotive Accessory Fitting sets you up for roles like these, but the skills you learn could take you even further.
-
Motor Vehicle Parts and Accessories Fitter (General)
ANZSCO 899411
Motor Vehicle Parts and Accessories Fitters (General) fit and replace parts and accessories on motor vehicles.
Recommended education level:
Certificate II or III
Training providers delivering Certificate II in Automotive Accessory Fitting
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
-
MTA Institute (RTO code 31529)
Government funding
- Skills Assure Supplier
Contact this provider
-
Institute of Automotive Mechanical Engineers Inc (RTO code 90409)
Contact this provider
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.