This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
-
Financial help
-
Government funding is available for this course. Check your eligibility for:
*To be eligible for this funding, you have to do an apprenticeship.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
To see how government funding could help to reduce the cost of your course, check your eligibility for funding.
-
-
On-the-job training
- Complete this course through an apprenticeship to work in this industry in Queensland.
This apprenticeship is available:
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Through apprenticeship:
4 years
- Through apprenticeship:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Apply WHS requirements, policies and procedures in the construction industry | Core |
| Calculate and install natural ventilation for Type A gas appliances | Core |
| Carry out interactive workplace communication | Core |
| Carry out levelling | Core |
| Carry out WHS requirements | Core |
| Cut and join sheet metal | Core |
| Disconnect and reconnect Type A gas appliances | Core |
| Fabricate and install non-ferrous pressure piping | Core |
| Flash penetrations through roofs and walls | Core |
| Handle and store plumbing materials | Core |
| Install and commission Type A gas appliances | Core |
| Install gas appliance flues | Core |
| Install gas pressure control equipment | Core |
| Install LPG storage of aggregate storage capacity up to 500 litres | Core |
| Install LPG systems in caravans, mobile homes and mobile workplaces | Core |
| Install LPG systems in marine craft | Core |
| Maintain Type A gas appliances | Core |
| Provide First Aid | Core |
| Purge consumer piping | Core |
| Read plans, calculate quantities and mark out materials | Core |
| Size and install consumer gas piping systems | Core |
| Use plumbing hand and power tools | Core |
| Weld polymer pipes using fusion method | Core |
| Work effectively in the plumbing services sector | Core |
| Work safely at heights | Core |
| Work safely on roofs | Core |
| Assess operational risk when working with hydrogen | Elective |
| Carry out load slinging of off-site materials | Elective |
| Carry out simple concreting and rendering | Elective |
| Cut using oxy-acetylene equipment | Elective |
| Design and size consumer gas installations | Elective |
| Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring | Elective |
| Erect and dismantle restricted height scaffolding | Elective |
| Fabricate and install steel pressure piping | Elective |
| Install gas sub-meters | Elective |
| Install LPG storage of aggregate storage capacity exceeding 500 litres and less than 8 kl | Elective |
| Install small bore heating systems | Elective |
| Install trench support | Elective |
| Operate elevated work platforms up to 11 metres | Elective |
| Operate personnel and materials hoists | Elective |
| Organise and communicate information | Elective |
| Perform routine gas metal arc welding | Elective |
| Perform routine gas tungsten arc welding | Elective |
| Prepare simple drawings | Elective |
| Produce 2-D architectural drawings using design software | Elective |
| Undertake manual handling | Elective |
| Weld using metal arc welding equipment | Elective |
| Work safely and effectively in manufacturing and engineering | Elective |
Job prospects
The Certificate III in Gas Fitting sets you up for roles like these, but the skills you learn could take you even further.
-
Plumber (General)
ANZSCO 334111
Plumbers (General) install and repair water, drainage, gas and sewerage pipes and systems.
Recommended education level:
Certificate III or IV -
Gasfitter
ANZSCO 334114
Gasfitters install, maintain and repair gas mains, piping systems downstream of billing meters, and appliances and ancillary equipment associated with the use of fuel gases, including liquefied petroleum gas systems.
Recommended education level:
Certificate III or IV -
Electrician (General)
ANZSCO 341111
Electricians (General) install, test, connect, commission, maintain and modify electrical equipment, wiring and control systems.
Recommended education level:
Certificate III or IV
Training providers delivering Certificate III in Gas Fitting
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
-
TAFE QUEENSLAND (RTO code 0275)
Government funding
- Skills Assure Supplier
Contact this provider
-
BIZMATRIX (RTO code 32074)
Contact this provider
-
TEC-NQ (RTO code 31444)
Contact this provider
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.