This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This is a qualification for fire protection technicians responsible for non-trade installation, commissioning and complex servicing of fire protection systems or for supervision of fire protection services work.
At Certificate III level, fire protection technicians may specialise in activities relating to certain types of systems, such as:
- installing and commissioning pre-engineered fire-suppression systems
- installing gaseous fire-suppression system containers and actuators
- conducting complex servicing of fire protection systems.
Licensing, legislative, regulatory or certification requirements apply to fire protection inspection and testing in some states and territories. For further information, check with the relevant regulatory authority.
-
Financial help
-
Government funding is not available for this course.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
-
-
On-the-job training
- Apprenticeships and traineeships are not available for this course.
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Qualification only:
1–2 years
- Qualification only:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Demonstrate first attack firefighting equipment | Core |
| Identify and report on types of installed fire safety equipment and systems | Core |
| Maintain quality of work and promote continuous improvement | Core |
| Organise personal work priorities | Core |
| Participate in workplace safety arrangements | Core |
| Prepare for installation and servicing operations | Core |
| Assist with maintaining workplace safety | Elective |
| Carry out WHS requirements | Elective |
| Conduct annual routine service of complex water-based fire-suppression systems | Elective |
| Conduct enclosure integrity testing | Elective |
| Conduct functional water flow testing | Elective |
| Contribute to continuous improvement | Elective |
| Decommission gaseous agent containers and actuators | Elective |
| Deliver and monitor a service to customers | Elective |
| Inspect and maintain portable foam-generating equipment | Elective |
| Inspect and test control and indicating equipment | Elective |
| Inspect, test and maintain portable fire monitors | Elective |
| Install and commission pre-engineered fire-suppression systems | Elective |
| Install gaseous agent containers and actuators | Elective |
| Install passive fire and smoke containment systems | Elective |
| Interpret installation requirements for gaseous fire-suppression systems | Elective |
| Maintain business resources | Elective |
| Provide First Aid | Elective |
| Provide work skill instruction | Elective |
| Safely move loads and dangerous goods | Elective |
| Support effective workplace relationships | Elective |
| Support the learning and development of teams and individuals | Elective |
| Work in a team | Elective |
Job prospects
The Certificate III in Fire Protection Inspection and Testing sets you up for roles like these, but the skills you learn could take you even further.
-
Electrician (General)
ANZSCO 341111
Electricians (General) install, test, connect, commission, maintain and modify electrical equipment, wiring and control systems.
Recommended education level:
Certificate III or IV -
Electronic Instrument Trades Worker (General)
ANZSCO 342314
Electronic Instrument Trades Workers (General) install, modify, maintain and repair electronic instruments and control systems.
Recommended education level:
Certificate III or IV -
Electronic Instrument Trades Worker (Special Class)
ANZSCO 342315
Electronic Instrument Trades Workers (Special Class) install, modify, maintain and repair complex electronic instruments and control systems which involve a combination of electrical, electronic, mechanical, hydraulic and pneumatic principles.
Recommended education level:
Certificate III or IV -
Fire Protection Equipment Technician
ANZSCO 399918
Fire Protection Equipment Technicians install, test and maintain fire protection equipment and systems such as extinguishers, hoses, reels, hydrants, fire blankets, exit lighting, fire and smoke doors, gaseous fire suppression systems, passive fire and smoke containment systems and foam generating equipment.
Recommended education level:
Certificate III or IV
Training providers delivering Certificate III in Fire Protection Inspection and Testing
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
-
Adair Training Solutions (RTO code 2881)
Contact this provider
-
Australasia Fire and Emergency Response College (RTO code 45251)
Contact this provider
-
Axiom Compliance Learning (RTO code 40918)
Contact this provider
-
CHUBB FIRE (RTO code 21411)
Contact this provider
-
EXELGARD (RTO code 2839)
Contact this provider
-
FIRE PROTECTION ASSOCIATION AUSTRALIA (RTO code 20851)
Contact this provider
-
FIRE Training (RTO code 40843)
Contact this provider
-
Firefox Training Pty Ltd (RTO code 45700)
Contact this provider
-
O'Halloran Fire & Medical Pty Ltd (RTO code 91539)
Contact this provider
-
Safety Direct Solutions Pty Ltd (RTO code 51632)
Contact this provider
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.