This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification is applicable to employees of airlines and other operators of piston, jet and turbo-propeller aircraft and helicopters who are required to hold a Civil Aviation Safety Authority (CASA) A Licence to perform and certify a range of specified maintenance tasks that can be performed with the aircraft on a flight line or at the departure gate. On completion of the required maintenance tasks the individual is authorised to release the aircraft to service.
The qualification satisfies CASA requirements for the grant, under Civil Aviation Safety Regulation (CASR) Part 66 of an Aircraft Maintenance Engineer A Licence when:
- the skill and knowledge requirements align with CASA syllabus requirements described under ‘Licensing’ in the Companion Volume Implementation Guide
- training has been delivered in accordance with the requirements of CASR Part 147.
The units of competency that comprise this qualification consist of a mix of:
- common units that are applicable to all of the employment streams covered by the MEA Aeroskills Training Package or are of an administrative nature relating to the CASA A Licence
- a combination of Avionic, Mechanical and Structures Technical Stream units that apply to the range of tasks performed by the holders of CASA A Licences.
This qualification provides a number of credits towards higher level Aeroskills Certificates and towards the MEA50219 Diploma of Aeroskills (Mechanical) which is required for the grant of a CASA B1 Licence.
-
Financial help
-
Government funding is available for this course. Check your eligibility for:
*To be eligible for this funding, you have to do a traineeship.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
To see how government funding could help to reduce the cost of your course, check your eligibility for funding.
-
-
On-the-job training
- Completing this course through a traineeship can help you to learn the skills you need.
This traineeship is available:
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Through traineeship:
2 years - Qualification only:
6 months – 1 year
- Through traineeship:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Apply quality standards during aviation maintenance activities | Core |
| Apply self in the aviation maintenance environment | Core |
| Apply work health and safety practices in aviation maintenance | Core |
| Complete aviation maintenance industry documentation | Core |
| Interpret and use aviation maintenance industry manuals and specifications | Core |
| Participate in environmentally sustainable work practices | Core |
| Perform administrative processes to prepare for certification of civil aircraft A level line mainten | Core |
| Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance | Core |
| Perform basic repair of aircraft internal fittings during line maintenance | Core |
| Plan and organise aviation maintenance work activities | Core |
| Remove and install aircraft components | Core |
| Remove and install aircraft electrical/avionic components during line maintenance | Core |
| Remove and install general aircraft electrical hardware | Core |
| Use electrical test equipment to perform basic electrical tests on aircraft and components | Core |
| Perform scheduled line maintenance activities on gas turbine engine fixed wing aircraft | Elective |
| Perform scheduled line maintenance activities on gas turbine engine rotary wing aircraft | Elective |
| Perform scheduled line maintenance activities on piston engine fixed wing aircraft | Elective |
| Perform scheduled line maintenance activities on piston engine rotary wing aircraft | Elective |
Job prospects
The Certificate II in Aircraft Line Maintenance sets you up for roles like these, but the skills you learn could take you even further.
-
Aircraft Maintenance Engineer (Avionics)
ANZSCO 323111
Aircraft Maintenance Engineers (Avionics) inspect, test, align, repair and install aircraft electrical and avionic system components.
Recommended education level:
Certificate III or IV -
Aircraft Maintenance Engineer (Mechanical)
ANZSCO 323112
Aircraft Maintenance Engineers (Mechanical) inspect, test, repair and install aircraft hydromechanical and flight system components and aircraft engines, subassemblies and components.
Recommended education level:
Certificate III or IV
Training providers delivering Certificate II in Aircraft Line Maintenance
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
-
Aviation Australia (RTO code 30770)
Government funding
- Skills Assure Supplier
Contact this provider
-
Sigma Aerospace College Pty Ltd (RTO code 40713)
Government funding
- Skills Assure Supplier
Contact this provider
-
SKILLS COMPLIANCE PTY LTD (RTO code 41382)
Government funding
- Skills Assure Supplier
Contact this provider
-
Aerospace Training Services (RTO code 6738)
Contact this provider
-
BAE Systems Australia Ltd (RTO code 91134)
-
FLIGHT ONE SCHOOL OF ENGINEERING (RTO code 45165)
Contact this provider
-
TAFE NSW (RTO code 90003)
Contact this provider
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.