This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification applies to individuals employed within the General Aviation industry sector on the maintenance of small aircraft who are not seeking direct progression to a Civil Aviation Safety Authority (CASA) B1.2 Aircraft Maintenance Engineer Licence limited to basic small aircraft maintenance. It may also be of use as a first Aeroskills qualification for individuals transitioning from an allied trade to employment on small aircraft maintenance.
Depending on the choice of elective units credits may apply towards other qualifications at Certificate IV and Diploma levels.
There are 0 minimum work placement hours required for this unit.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
-
Financial help
-
Government funding is not available for this course.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
-
-
On-the-job training
- Apprenticeships and traineeships are not available for this course.
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Qualification only:
1–2 years
- Qualification only:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Apply mathematics and physics in aviation maintenance | Core |
| Apply quality standards during aviation maintenance activities | Core |
| Apply work health and safety practices in aviation maintenance | Core |
| Complete aviation maintenance industry documentation | Core |
| Conduct self in the aviation maintenance environment | Core |
| Fabricate and/or repair aircraft electrical hardware or parts | Core |
| Inspect and maintain structures and related components of non-pressurised small aircraft | Core |
| Interpret and use aviation maintenance industry manuals and specifications | Core |
| Maintain and repair small aircraft mechanical components and parts | Core |
| Participate in environmentally sustainable work practices | Core |
| Perform aircraft flight servicing | Core |
| Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance | Core |
| Plan and organise aviation maintenance work activities | Core |
| Remove and install miscellaneous aircraft electrical hardware/components | Core |
| Use electrical test equipment in aviation maintenance activities | Core |
| Inspect aircraft structures | Elective |
| Inspect and repair aircraft wooden structures | Elective |
| Inspect, test and repair aircraft fabric surfaces | Elective |
| Inspect, test and troubleshoot aircraft hydro-mechanical and landing gear systems and components | Elective |
| Inspect, test and troubleshoot basic aircraft electrical systems and components | Elective |
| Inspect, test and troubleshoot gas turbine engine systems and components | Elective |
| Inspect, test and troubleshoot piston engine systems and components | Elective |
| Inspect, test and troubleshoot propeller systems and components | Elective |
| Inspect, test and troubleshoot rotary wing rotor and control systems and components | Elective |
| Maintain aircraft diesel engines | Elective |
| Maintain aircraft two stroke petrol engines | Elective |
| Maintain aircraft vapour cycle air conditioning systems | Elective |
| Maintain airframe systems of basic light fixed wing aircraft | Elective |
| Maintain basic aircraft communication and radio navigation systems and components | Elective |
| Maintain basic light aircraft electrical systems and components | Elective |
| Maintain basic light aircraft engines and propellers | Elective |
| Maintain basic light aircraft instrument systems and components | Elective |
| Maintain basic rotary wing aircraft systems | Elective |
| Maintain light aircraft air cycle air conditioning systems | Elective |
| Maintain light aircraft pneumatic systems | Elective |
| Maintain small piston engine aircraft pressurisation systems | Elective |
| Modify and repair aircraft composite materials structures and components | Elective |
| Modify and repair aircraft composite structure using cold bonding | Elective |
| Perform major modifications and repairs to small aircraft metal structure | Elective |
| Remove and install aircraft hydro-mechanical and landing gear system components | Elective |
| Remove and install basic aircraft electrical system components | Elective |
| Remove and install engines and engine system components | Elective |
| Remove and install non-pressurised aircraft structural and non-structural components | Elective |
| Remove and install propeller systems and components | Elective |
| Remove and install rotary wing rotor and flight control system components | Elective |
| Repair the structure of non-pressurised small aircraft | Elective |
Training providers delivering Certificate III in Aeroskills (Mechatronics)
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
No providers found for this course.
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.