This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification applies to employees of Civil Aviation Maintenance Organisations (AMOs) or to members of the Australian Defence Force (ADF) who perform scheduled inspections, fault diagnosis and repair, and modification of airframes and airframe mechanical, hydraulic and pneumatic systems and components and of aircraft engines and (where applicable) propellers.
The qualification applies to either aircraft maintenance performed on flight lines/ramps and in hangars, or to airframe and engine component repair and overhaul performed in workshops. These outcomes are defined in two streams:
- aircraft maintenance stream
- component maintenance workshop stream.
The qualification consists of:
- common units that apply to all Aeroskills specialist streams at AQF Certificate III and IV levels
- mechanical and structures technical stream units relating to airframe and engine system and component maintenance
- mechanical technical stream units and a small number of avionic stream units that are applicable to the aircraft component maintenance workshop stream.
Because of the wide application of this qualification there is considerable flexibility in the selection of technical stream units and individuals should be mindful of their future career aspirations when selecting units for, in particular, the aircraft maintenance stream. Provided that the correct elective units are selected, the qualification articulates with the MEA50219 Diploma of Aeroskills (Mechanical), which qualifies individuals for the grant by Civil Aviation Safety Authority (CASA) of a B1 Aircraft Maintenance Engineer Licence.
The qualification also provides credit towards the MEA50422 Diploma of Aviation Maintenance Management and the MEA60222 Advanced Diploma of Aviation Maintenance Management.
There are 0 minimum work placement hours required for this unit.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
-
Financial help
-
Government funding is available for this course. Check your eligibility for:
*To be eligible for this funding, you have to do an apprenticeship.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
To see how government funding could help to reduce the cost of your course, check your eligibility for funding.
-
-
On-the-job training
- Completing this course through an apprenticeship can help you to learn the skills you need.
This apprenticeship is available:
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Through apprenticeship:
4 years
- Through apprenticeship:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Apply quality standards during aviation maintenance activities | Core |
| Apply work health and safety practices in aviation maintenance | Core |
| Complete aviation maintenance industry documentation | Core |
| Conduct self in the aviation maintenance environment | Core |
| Interpret and use aviation maintenance industry manuals and specifications | Core |
| Participate in environmentally sustainable work practices | Core |
| Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance | Core |
| Plan and organise aviation maintenance work activities | Core |
| Apply metallurgical principles | Elective |
| Assemble aircraft piston engine quick engine change unit | Elective |
| Disassemble aircraft piston engines | Elective |
| Fabricate and repair aircraft mechanical components or component parts | Elective |
| Fabricate and/or repair aircraft electrical hardware or parts | Elective |
| Inspect aircraft hydro-mechanical, mechanical, gaseous and landing gear systems and components | Elective |
| Inspect aircraft structures | Elective |
| Inspect gas turbine engine systems and components | Elective |
| Inspect, repair and maintain aircraft structures | Elective |
| Inspect, test and troubleshoot aircraft fixed wing flight control systems and components | Elective |
| Inspect, test and troubleshoot aircraft hydro-mechanical and landing gear systems and components | Elective |
| Inspect, test and troubleshoot aircraft pneumatic systems and components | Elective |
| Inspect, test and troubleshoot gas turbine engine systems and components | Elective |
| Inspect, test and troubleshoot piston engine systems and components | Elective |
| Inspect, test and troubleshoot propeller systems and components | Elective |
| Inspect, test and troubleshoot rotary wing rotor and control systems and components | Elective |
| Maintain aircraft structure and components | Elective |
| Maintain aircraft vapour cycle air conditioning systems | Elective |
| Maintain and/or repair aircraft mechanical components or parts | Elective |
| Marshal aircraft | Elective |
| Organise and communicate information | Elective |
| Perform aircraft flight servicing | Elective |
| Perform borescope inspections | Elective |
| Reassemble aircraft piston engines | Elective |
| Remove and install aircraft fixed wing flight control system components | Elective |
| Remove and install aircraft hydro-mechanical and landing gear system components | Elective |
| Remove and install aircraft pneumatic system components | Elective |
| Remove and install engines and engine system components | Elective |
| Remove and install miscellaneous aircraft electrical hardware/components | Elective |
| Remove and install non-pressurised aircraft structural and non-structural components | Elective |
| Remove and install pressurised aircraft structural and non-structural components | Elective |
| Remove and install propeller systems and components | Elective |
| Remove and install rotary wing rotor and flight control system components | Elective |
| Repair and overhaul aircraft fuel system components | Elective |
| Repair and overhaul aircraft hydraulic system components | Elective |
| Repair and overhaul aircraft mechanical system components | Elective |
| Repair and overhaul aircraft piston engine crankcase assembly components | Elective |
| Repair and overhaul aircraft piston engine cylinder assembly components | Elective |
| Repair and overhaul aircraft pneumatic system components | Elective |
| Repair and overhaul gas turbine engine air inlet and compressor components and modules | Elective |
| Repair and overhaul gas turbine engine ancillary section components | Elective |
| Repair and overhaul gas turbine engine combustion section components and modules | Elective |
| Repair and overhaul gas turbine, engine turbine and exhaust section components | Elective |
| Repair and overhaul propellers | Elective |
| Repair and overhaul rotary wing dynamic components | Elective |
| Shot-peen aircraft components | Elective |
| Test aircraft piston engines after repair or overhaul | Elective |
| Test and troubleshoot aircraft fixed wing flight control systems and components | Elective |
| Test and troubleshoot aircraft hydro-mechanical, gaseous and landing gear systems and components | Elective |
| Test and troubleshoot gas turbine engine systems and components | Elective |
| Test gas turbine engines and engine modules after overhaul or repair | Elective |
| Undertake basic magnetic particle tests | Elective |
| Undertake basic penetrant tests | Elective |
| Use electrical test equipment in aviation maintenance activities | Elective |
| Work safely and effectively in manufacturing and engineering | Elective |
Job prospects
The Certificate IV in Aeroskills (Mechanical) sets you up for roles like these, but the skills you learn could take you even further.
-
Aircraft Maintenance Engineer (Avionics)
ANZSCO 323111
Aircraft Maintenance Engineers (Avionics) inspect, test, align, repair and install aircraft electrical and avionic system components.
Recommended education level:
Certificate III or IV -
Aircraft Maintenance Engineer (Mechanical)
ANZSCO 323112
Aircraft Maintenance Engineers (Mechanical) inspect, test, repair and install aircraft hydromechanical and flight system components and aircraft engines, subassemblies and components.
Recommended education level:
Certificate III or IV -
Aircraft Maintenance Engineer (Structures)
ANZSCO 323113
Aircraft Maintenance Engineers (Structures) inspect, dismantle and reassemble aircraft structures, and repair and replace components of aircraft frames.
Recommended education level:
Certificate III or IV
Training providers delivering Certificate IV in Aeroskills (Mechanical)
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
-
Aviation Australia (RTO code 30770)
Government funding
- Skills Assure Supplier
Contact this provider
-
Sigma Aerospace College Pty Ltd (RTO code 40713)
Government funding
- Skills Assure Supplier
Contact this provider
-
Aerospace Training Services (RTO code 6738)
Contact this provider
-
BAE Systems Australia Ltd (RTO code 91134)
-
DEPARTMENT OF DEFENCE (RTO code 0442)
Contact this provider
-
FLIGHT ONE SCHOOL OF ENGINEERING (RTO code 45165)
Contact this provider
-
TAFE NSW (RTO code 90003)
Contact this provider
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.