This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification applies to individuals who perform non-destructive testing (NDT) on aircraft and aircraft components in accordance with AS 3669-2006 Non-destructive testing – Qualification and approval of personnel – Aerospace at Level 2 and in compliance with the regulatory requirements of the Civil Aviation Safety Authority (CASA) and of the Defence Aviation Safety Authority (DASA).
The qualification consists of:
- preliminary core common and technical stream units for individuals who do not have a Certificate IV in Aeroskills
- core units, consisting of:
- common and technical stream units that relate to the aviation maintenance environment
- technical stream and imported units relating to the NDT work environment
- imported units that specifically cover the competencies required to perform each relevant NDT technique to the standard specified in AS 3669-2006 Non-destructive testing – Qualification and approval of personnel – Aerospace for Level 2 personnel.
- elective units, consisting of:
- common units specific to either CASA or DASA regulatory requirements
- technical stream and imported units that are applicable to various areas of employment in the NDT field.
The qualification provides two training pathways:
- one for Certificate IV qualified aviation tradespersons to progress to the Diploma level NDT qualification (the career path for uniformed ADF personnel and possibly some civilian personnel)
- one for progression to Diploma level NDT qualification from direct entry (the career path that may be followed by NDT personnel used by the maintenance organisations other than those operating under the ADF regulatory system).
The qualification also provides credits towards the MEA50422 Diploma of Aviation Maintenance Management, the MEA60222 Advanced Diploma of Aviation Maintenance Management and the MEA60322 Advanced Diploma of Aviation Non-Destructive Testing.
-
Financial help
-
Government funding is not available for this course.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
-
-
On-the-job training
- Apprenticeships and traineeships are not available for this course.
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Qualification only:
1–2 years
- Qualification only:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Apply basic aircraft design characteristics | Core |
| Apply basic aircraft power plant design characteristics | Core |
| Apply mathematical techniques in a manufacturing engineering or related environment | Core |
| Apply metallurgy principles | Core |
| Apply quality standards during aviation maintenance activities | Core |
| Apply work health and safety practices in aviation maintenance | Core |
| Apply work health and safety procedures at supervisor level in aviation maintenance | Core |
| Communicate aviation technical and maintenance management knowledge | Core |
| Complete aviation maintenance industry documentation | Core |
| Evaluate aircraft non-destructive tests | Core |
| Implement and monitor environmentally sustainable work practices | Core |
| Interpret and use aviation maintenance industry manuals and specifications | Core |
| Interpret technical drawing | Core |
| Lay out and set up aircraft systems | Core |
| Manage self in the aviation maintenance environment | Core |
| Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance | Core |
| Perform eddy current testing | Core |
| Perform magnetic particle testing | Core |
| Perform penetrant testing | Core |
| Perform precision mechanical measurement | Core |
| Perform radiographic testing | Core |
| Perform ultrasonic testing | Core |
| Plan and organise aviation maintenance work activities | Core |
| Prepare basic engineering drawing | Core |
| Select common engineering materials | Core |
| Use and maintain reference standards | Core |
| Use computers in aviation maintenance-related integrated logistic support activities | Core |
| Use electrical test equipment in aviation maintenance activities | Core |
| Use electronic test equipment | Core |
| Work safely with ionizing radiation | Core |
| Write reports | Core |
| Conduct workplace assessment | Elective |
| Perform laboratory procedures | Elective |
| Plan and implement civil aircraft maintenance activities | Elective |
| Provide work skill instruction | Elective |
| Supervise aviation maintenance teams and perform maintenance quality inspections | Elective |
| Supervise civil aircraft maintenance activities and manage human resources in the workplace | Elective |
Training providers delivering Diploma of Aeroskills (Non-Destructive Testing)
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
No providers found for this course.
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.