This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification defines the skills and knowledge required of an engineering/manufacturing employee within metal, engineering, manufacturing and associated industries.
The skills associated with this qualification are intended to apply to a wide range of engineering/manufacturing work, including production, distribution, stores and warehousing. It provides the skills and knowledge for a person to be responsible for the quality of their own work, work from complex instructions and procedures, coordinate work in a team environment or work individually under general supervision and assist in the provision of on-the-job training of other workers.
This qualification is specifically designed to cover the skills and knowledge required of workers employed as Engineering/Manufacturing Employees - Level IV as defined in the Manufacturing and Associated Industries and Occupations Award.
Assessment of some units of competency must, where indicated, include evidence of the candidate's performance in a functioning workplace where there is a sufficient range of appropriate tasks and/or materials to cover the scope of application of those units. All outcomes must reflect the standard of performance required of the work associated with the Unit/s.
This qualification is not suited and should not be used for people who are not employed in an engineering production or manufacturing environment, nor should it be used for school students unless they are formally engaged in a traineeship in accordance with the Australian Apprenticeships policy.
In some jurisdictions units in this qualification may relate to licensing or regulatory requirements. Local regulations should be checked.
There are 0 minimum work placement hours required for this unit.
-
Financial help
-
Government funding is available for this course. Check your eligibility for:
*To be eligible for this funding, you have to do a traineeship.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
To see how government funding could help to reduce the cost of your course, check your eligibility for funding.
-
-
On-the-job training
- Completing this course through a traineeship can help you to learn the skills you need.
This traineeship is available:
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Through traineeship:
2 years - Qualification only:
6 months – 1 year
- Through traineeship:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Assist in the provision of on-the-job training | Core |
| Organise and communicate information | Core |
| Participate in environmentally sustainable work practices | Core |
| Perform engineering measurements | Core |
| Undertake manual handling | Core |
| Use hand tools | Core |
| Work safely and effectively in manufacturing and engineering | Core |
| Administer inventory procedures | Elective |
| Apply protective coatings (advanced) | Elective |
| Apply protective coatings (basic) | Elective |
| Carry out mechanical cutting | Elective |
| Commission and decommission split air conditioning systems | Elective |
| Control blast coating by-products, materials and emissions | Elective |
| Control surface finish production and finished product quality | Elective |
| Dismantle, replace and assemble engineering components | Elective |
| Electroplate engineering coatings | Elective |
| Electroplate protective finishes | Elective |
| Erect/dismantle intermediate scaffolding and equipment | Elective |
| Erect/dismantle scaffolding and equipment | Elective |
| Fettle and trim metal castings/forgings | Elective |
| Finish work using wet, dry and vapour deposition methods | Elective |
| Handle fluorocarbon refrigerants according to regulations | Elective |
| Handle/move bulk fluids/gases | Elective |
| Install split air conditioning systems and associated pipework | Elective |
| Interact with computing technology | Elective |
| Interpret technical drawing | Elective |
| Licence to erect, alter and dismantle scaffolding basic level | Elective |
| Licence to erect, alter and dismantle scaffolding intermediate level | Elective |
| Licence to operate a bridge and gantry crane | Elective |
| Licence to operate a forklift truck | Elective |
| Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity) | Elective |
| Licence to operate an order picking forklift truck | Elective |
| Licence to perform dogging | Elective |
| Licence to perform rigging basic level | Elective |
| Maintain water treatment systems for cooling towers | Elective |
| Maintain wheels and tyres | Elective |
| Make up solutions | Elective |
| Manually finish/polish materials | Elective |
| Measure components using coordinate measuring machines | Elective |
| Monitor quality of production welding/fabrications | Elective |
| Operate a bridge and gantry crane | Elective |
| Operate a non-slewing mobile crane of greater than three tonnes capacity | Elective |
| Operate and control surface finishing waste treatment process | Elective |
| Operate and monitor basic boiler | Elective |
| Operate and monitor machine and process | Elective |
| Operate as a team member to conduct manufacturing, engineering or related activities | Elective |
| Operate computer controlled machines and processes | Elective |
| Operate fixed/moveable load shifting equipment | Elective |
| Operate melting furnaces | Elective |
| Operate mobile load shifting equipment | Elective |
| Operate pressure die casting machine | Elective |
| Operate sand moulding and core making machines | Elective |
| Order materials | Elective |
| Package materials (stores and warehouse) | Elective |
| Perform advanced operation of load shifting equipment | Elective |
| Perform aluminothermic welding | Elective |
| Perform automated thermal cutting | Elective |
| Perform basic incidental heat/quenching, tempering and annealing | Elective |
| Perform basic metal spinning lathe operations | Elective |
| Perform basic statistical quality control | Elective |
| Perform brazing and/or silver soldering | Elective |
| Perform complex machine setting | Elective |
| Perform computations | Elective |
| Perform electrical/electronic measurement | Elective |
| Perform electronic/electrical assembly (production) | Elective |
| Perform electroplating operations | Elective |
| Perform emergency first aid | Elective |
| Perform general woodworking machine operations | Elective |
| Perform gravity die casting | Elective |
| Perform hand forging | Elective |
| Perform high reliability soldering and desoldering | Elective |
| Perform inspection | Elective |
| Perform internal/external customer service | Elective |
| Perform manual heating and thermal cutting | Elective |
| Perform manual production assembly | Elective |
| Perform manual production welding | Elective |
| Perform manual soldering/desoldering - electrical/electronic components | Elective |
| Perform operational maintenance of machines/equipment | Elective |
| Perform precision assembly | Elective |
| Perform production machining | Elective |
| Perform production packaging | Elective |
| Perform refractory installation and repair | Elective |
| Perform routine gas metal arc welding | Elective |
| Perform routine gas tungsten arc welding | Elective |
| Perform routine machine setting | Elective |
| Perform routine manual metal arc welding | Elective |
| Perform routine oxy fuel gas welding | Elective |
| Perform routine sharpening and maintenance of production tools and cutters | Elective |
| Perform routine submerged arc welding | Elective |
| Perform sheet and plate assembly | Elective |
| Perform soft soldering | Elective |
| Perform wire, jig and barrel load/unload work | Elective |
| Pick and process order | Elective |
| Plan work activities | Elective |
| Pour molten metal | Elective |
| Prepare and mix sand for metal moulding | Elective |
| Prepare and produce specialised coatings | Elective |
| Prepare surfaces by abrasive blasting (advanced) | Elective |
| Prepare surfaces by abrasive blasting (basic) | Elective |
| Prepare surfaces using solvents and/or mechanical means | Elective |
| Prepare to perform work associated with fuel system installation and servicing | Elective |
| Pre-treat work for subsequent surface coating | Elective |
| Produce clear and/or coloured and/or sealed anodised films on aluminium | Elective |
| Rework and repair (electrical/electronic production) | Elective |
| Service combustion engines | Elective |
| Set assembly stations | Elective |
| Set computer controlled machines and processes | Elective |
| Terminate and connect electrical wiring | Elective |
| Test, recover, evacuate and charge refrigeration systems | Elective |
| Undertake basic rigging | Elective |
| Undertake dogging | Elective |
| Undertake tool store procedures | Elective |
| Undertake warehouse dispatch process | Elective |
| Undertake warehouse receival process | Elective |
| Undertake work health and safety activities in the workplace | Elective |
| Use comparison and basic measuring devices | Elective |
| Use improvement processes in team activities | Elective |
| Use power tools/hand held operations | Elective |
| Use workshop machines for basic operations | Elective |
| Work safely with industrial chemicals and materials | Elective |
| Work safely with ionizing radiation | Elective |
| Work safely with molten metals/glass | Elective |
Job prospects
The Certificate II in Engineering - Production Technology sets you up for roles like these, but the skills you learn could take you even further.
-
Electronic Equipment Trades Worker
ANZSCO 342313
Electronic Equipment Trades Workers install, maintain and repair electronic equipment and systems such as audio and visual reproduction equipment, home entertainment systems, computers and electronic security systems.
Recommended education level:
Certificate III or IV -
Metal Engineering Process Worker
ANZSCO 839111
Metal Engineering Process Workers perform routine tasks in manufacturing metal products.
Recommended education level:
Certificate I or secondary education
Training providers delivering Certificate II in Engineering - Production Technology
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
-
TAFE QUEENSLAND (RTO code 0275)
Government funding
- Skills Assure Supplier
Contact this provider
-
CQUniversity Australia (RTO code 40939)
Government funding
- Skills Assure Supplier
Contact this provider
-
AWS Centre of Excellence Pty Ltd (RTO code 46412)
Contact this provider
-
AXIAL TRAINING PTY LTD (RTO code 2437)
Contact this provider
-
Blue Tongue Training Pty Ltd (RTO code 1623)
Contact this provider
-
Challenge Employment & Training Ltd (RTO code 5388)
Contact this provider
-
Educational Living Pty Ltd (RTO code 3784)
Contact this provider
-
Kangaroo Training Institute Pty Ltd (RTO code 45142)
Contact this provider
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.