This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification defines the skills and knowledge required of an Engineering Tradesperson - Patternmaking within the metal, engineering, manufacturing and associated industries.
The skills associated with this qualification are intended to apply to a wide range of patternmaking work including constructing full-size engineering model out of timber. Patternmakers also produce visual models, experimental models and models for the manufacture of prototype developmental products
This qualification is designed to provide an industry recognised skills profile related to work as a patternmaker. Skills development should be undertaken through an Australian Apprenticeship arrangement where the mix of on and off-the-job training would be specified in the Training Plan associated with the Contract of Training between the employer and apprentice.
Assessment of some units of competency must, where indicated, include evidence of the candidate's performance in a functioning workplace where there is a sufficient range of appropriate tasks and materials to cover the scope of application of those units. All outcomes must reflect the standard of performance inherent in the job.
In some jurisdictions, units in this qualification may relate to licensing or regulatory requirements. Licensing and regulatory information is included in the relevant units of competency.
No licensing, legislative or certification requirements apply to this qualification at the time of publication. Local regulations should be checked.
-
Financial help
-
Government funding is available for this course. Check your eligibility for:
*To be eligible for this funding, you have to do an apprenticeship.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
To see how government funding could help to reduce the cost of your course, check your eligibility for funding.
-
-
On-the-job training
- Completing this course through an apprenticeship can help you to learn the skills you need.
This apprenticeship is available:
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Through apprenticeship:
4 years
- Through apprenticeship:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Assist in the provision of on-the-job training | Core |
| Develop and manufacture conveyor screw patterns | Core |
| Develop and manufacture polystyrene patterns | Core |
| Develop and manufacture propeller patterns | Core |
| Interact with computing technology | Core |
| Interpret technical drawing | Core |
| Organise and communicate information | Core |
| Participate in environmentally sustainable work practices | Core |
| Perform advanced trade calculations in a manufacturing, engineering or related environment | Core |
| Perform computations | Core |
| Perform engineering measurements | Core |
| Perform general woodworking machine operations | Core |
| Plan work activities | Core |
| Produce polymer patterns | Core |
| Undertake manual handling | Core |
| Use hand tools | Core |
| Use power tools/hand held operations | Core |
| Use workshop machines for basic operations | Core |
| Work safely and effectively in manufacturing and engineering | Core |
| Apply basic engineering design concepts | Elective |
| Assemble plated patterns | Elective |
| Develop and manufacture bevel gear patterns | Elective |
| Develop and manufacture chain gear and sprocket patterns | Elective |
| Develop and manufacture flat back wood patterns | Elective |
| Develop and manufacture irregular joint wood patterns | Elective |
| Develop and manufacture pipe patterns | Elective |
| Develop and manufacture precision models | Elective |
| Develop and manufacture production patterns | Elective |
| Develop and manufacture split patterns | Elective |
| Develop and manufacture spur gear patterns | Elective |
| Develop and manufacture turned wood patterns | Elective |
| Develop and manufacture vacuum forming moulds and associated equipment | Elective |
| Develop and manufacture wooden wheel patterns | Elective |
| Maintain patterns | Elective |
| Mark off/out (general engineering) | Elective |
| Measure components using coordinate measuring machines | Elective |
| Operate as a team member to conduct manufacturing, engineering or related activities | Elective |
| Order materials | Elective |
| Perform emergency first aid | Elective |
| Perform general machining | Elective |
| Perform inspection | Elective |
| Perform precision mechanical measurement | Elective |
| Program coordinate measuring machines | Elective |
| Program coordinate measuring machines (advanced) | Elective |
| Set and operate coordinate measuring machines | Elective |
| Undertake work health and safety activities in the workplace | Elective |
| Use comparison and basic measuring devices | Elective |
| Work safely with industrial chemicals and materials | Elective |
| Work safely with molten metals/glass | Elective |
Job prospects
The Certificate III in Engineering - Patternmaking Trade sets you up for roles like these, but the skills you learn could take you even further.
-
Engineering Patternmaker
ANZSCO 323411
Engineering Patternmakers construct full-size engineering models usually made out of timber, which are used in manufacturing to produce metal castings, copy models, vacuum form tooling and tooling for the automotive, aircraft or fibreglass industries.
Recommended education level:
Certificate III or IV -
Toolmaker
ANZSCO 323412
Toolmakers make and repair tools, dies, jigs, fixtures and other precision parts and equipment to fine tolerances, for machine tools and other production machinery.
Recommended education level:
Certificate III or IV
Training providers delivering Certificate III in Engineering - Patternmaking Trade
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
-
TAFE QUEENSLAND (RTO code 0275)
Government funding
- Skills Assure Supplier
Contact this provider
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.