This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification defines the skills and knowledge required of an Engineering Tradesperson – Textile Mechanic within textile related industries.
The skills associated with this qualification are intended to apply to a wide range of textile mechanic trade work, including setting up, adjusting and maintaining carding, footwear manufacture, knitting, sewing, spinning, tufting, or weaving machinery.
This qualification is designed to provide an industry recognised skills profile related to work as a textile mechanic. Skills development should be undertaken through an Australian Apprenticeship arrangement where the mix of on and off-the-job training would be specified in the Training Plan associated with the Contract of Training between the employer and apprentice.
Assessment of some units of competency must, where indicated, include evidence of the candidate's performance in a functioning workplace where there is a sufficient range of appropriate tasks and materials to cover the scope of application of those units. All outcomes must reflect the standard of performance inherent in the job.
In some jurisdictions, units in this qualification may relate to licensing or regulatory requirements. Licensing and regulatory information is included in the relevant units of competency. Local regulations should be checked.
There are 0 minimum work placement hours required for this unit.
-
Financial help
-
Government funding is not available for this course.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
-
-
On-the-job training
- Apprenticeships and traineeships are not available for this course.
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Qualification only:
1–2 years
- Qualification only:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Assist in the provision of on-the-job training | Core |
| Interact with computing technology | Core |
| Interpret technical drawing | Core |
| Organise and communicate information | Core |
| Participate in environmentally sustainable work practices | Core |
| Perform computations | Core |
| Perform engineering measurements | Core |
| Plan work activities | Core |
| Undertake manual handling | Core |
| Use hand tools | Core |
| Use power tools/hand held operations | Core |
| Work safely and effectively in manufacturing and engineering | Core |
| Apply basic engineering design concepts | Elective |
| Apply safe welding practices | Elective |
| Balance equipment | Elective |
| Carry out heat treatment | Elective |
| Carry out mechanical cutting | Elective |
| Connect and disconnect fluid conveying system components | Elective |
| Diagnose and rectify batteries, low voltage sensors and circuits | Elective |
| Dismantle, replace and assemble engineering components | Elective |
| Enter and change programmable controller operational parameters | Elective |
| Install machine/plant | Elective |
| Maintain and repair mechanical drives and mechanical transmission assemblies | Elective |
| Maintain hydraulic system components | Elective |
| Maintain pneumatic system components | Elective |
| Manufacture fluid conveying conductor assemblies | Elective |
| Mark off/out (general engineering) | Elective |
| Operate and monitor machine and process | Elective |
| Operate as a team member to conduct manufacturing, engineering or related activities | Elective |
| Operate computer controlled machines and processes | Elective |
| Operate fixed/moveable load shifting equipment | Elective |
| Operate mobile load shifting equipment | Elective |
| Order materials | Elective |
| Perform basic incidental heat/quenching, tempering and annealing | Elective |
| Perform brazing and/or silver soldering | Elective |
| Perform electrical/electronic measurement | Elective |
| Perform emergency first aid | Elective |
| Perform equipment condition monitoring and recording | Elective |
| Perform fault diagnosis, installation and removal of bearings | Elective |
| Perform general machining | Elective |
| Perform grinding operations | Elective |
| Perform installation and removal of mechanical seals | Elective |
| Perform lathe operations | Elective |
| Perform manual heating and thermal cutting | Elective |
| Perform milling operations | Elective |
| Perform precision fitting of engineering components | Elective |
| Perform precision levelling and alignment of machines and engineering components | Elective |
| Perform precision mechanical measurement | Elective |
| Perform routine gas metal arc welding | Elective |
| Perform routine gas tungsten arc welding | Elective |
| Perform routine manual metal arc welding | Elective |
| Perform routine oxy fuel gas welding | Elective |
| Prepare basic engineering drawing | Elective |
| Select welding processes | Elective |
| Set and edit computer controlled machines and processes | Elective |
| Set computer controlled machines and processes | Elective |
| Set up, adjust and maintain industrial sewing machines | Elective |
| Set up, adjust and monitor a machine for TCF production | Elective |
| Shut down and isolate machines/equipment | Elective |
| Terminate and connect electrical wiring | Elective |
| Undertake work health and safety activities in the workplace | Elective |
| Use improvement processes in team activities | Elective |
| Use tools for precision work | Elective |
| Weld using flame powder spraying | Elective |
| Weld using oxy fuel gas welding process | Elective |
| Work safely with industrial chemicals and materials | Elective |
Training providers delivering Certificate III in Engineering - Textile Mechanic
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
No providers found for this course.
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.