This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification provides competencies to overhaul and repair motor, transformer and control gear including rewinding.
There are 0 minimum work placement hours required for this unit.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
-
Financial help
-
Government funding is not available for this course.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
-
-
On-the-job training
- Completing this course through an apprenticeship can help you to learn the skills you need.
This apprenticeship is available:
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Through apprenticeship:
4 years
- Through apprenticeship:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Apply environmentally and sustainable procedures in the energy sector | Core |
| Apply work health and safety regulations, codes and practices in the workplace | Core |
| Carry out basic repairs to electrical components and equipment | Core |
| Conduct electrical tests on LV electrical machines | Core |
| Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring | Core |
| Document and apply measures to control WHS risks associated with electrotechnology work | Core |
| Engage in instrumentation, control, machine or switchgear work and competency development | Core |
| Fabricate, assemble and dismantle utilities industry components | Core |
| Fix and secure electrotechnology equipment | Core |
| Place and connect electrical coils | Core |
| Repair and maintain mechanical components of electrical machines | Core |
| Rewind three phase low voltage induction machines | Core |
| Solve problems in direct current (d.c.) machines | Core |
| Solve problems in direct current circuits | Core |
| Solve problems in low voltage a.c. circuits | Core |
| Solve problems in magnetic and electromagnetic devices | Core |
| Terminate cables, cords and accessories for low voltage circuits | Core |
| Test and connect alternating current (a.c.) rotating machines | Core |
| Test and connect transformers | Core |
| Use drawings, diagrams, schedules, standards, codes and specifications | Core |
| Wind electrical coils | Core |
| Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply | Elective |
| Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c. | Elective |
| Comply with scheduled and preventative maintenance program processes | Elective |
| Conduct mechanical tests on electrical machines and components | Elective |
| Deliver a service to customers | Elective |
| Develop, enter and verify discrete control programs for programmable controllers | Elective |
| Locate and rectify faults in low voltage (LV) electrical equipment using set procedures | Elective |
| Maintain documentation | Elective |
| Operate application software packages | Elective |
| Overhaul and repair major switchgear and control gear | Elective |
| Prepare to work safely in the construction industry | Elective |
| Provide basic instruction in the use of electrotechnology apparatus | Elective |
| Provide cardiopulmonary resuscitation | Elective |
| Provide First Aid | Elective |
| Provide quotations for installation or service jobs | Elective |
| Rewind LV direct current machines | Elective |
| Rewind single phase machines | Elective |
| Service small electrical appliances and power tools | Elective |
| Source and purchase material/parts for installation or service jobs | Elective |
| Use engineering applications software on personal computers | Elective |
Job prospects
The Certificate III in Electrical Machine Repair sets you up for roles like these, but the skills you learn could take you even further.
-
Electrician (General)
ANZSCO 341111
Electricians (General) install, test, connect, commission, maintain and modify electrical equipment, wiring and control systems.
Recommended education level:
Certificate III or IV -
Lift Mechanic
ANZSCO 341113
Lift Mechanics design, install, maintain, service and repair electric and hydraulic passenger and freight lifts, escalators, moving walkways and other lift equipment.
Recommended education level:
Certificate III or IV
Training providers delivering Certificate III in Electrical Machine Repair
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
-
TAFE NSW (RTO code 90003)
Contact this provider
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.