This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification covers competencies to set up, service and repair electrical and refrigerated appliances with electives in gas appliances.
Competency development activities in this qualification are subject to regulations directly related to licencing. A relevant contract of training through an apprenticeship or relevant employment may be required to enable the application of the required knowledge and skills to on the job work activities and environments.
There are 0 minimum work placement hours required for this unit.
Refrigerant Handling Licence:
The achievement of the qualification meets the training components for the national restricted domestic refrigeration and air conditioning appliance Refrigerant Handling Licence, which is required to work on refrigeration and air conditioning equipment that carries the risk of a fluorocarbon refrigerant being emitted while decanting the refrigerant or manufacturing, installing, commissioning, servicing, maintaining or decommissioning refrigeration and air conditioning equipment.
Refrigeration and Air Conditioning Occupational Licence:
Additional and/or other conditions may apply in some jurisdictions subject to regulations related to domestic refrigerating and air conditioning appliance work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Electrical Occupation Licence:
The achievement of this qualification with the core restricted electrical units meet the electrical regulatory requirements for related restricted electrical work in most state/territories. This is required to work on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c).
-
Financial help
-
Government funding is available for this course. Check your eligibility for:
*To be eligible for this funding, you have to do an apprenticeship.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
To see how government funding could help to reduce the cost of your course, check your eligibility for funding.
-
-
On-the-job training
- Completing this course through an apprenticeship can help you to learn the skills you need.
This apprenticeship is available:
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Through apprenticeship:
4 years
- Through apprenticeship:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Apply environmentally and sustainable procedures in the energy sector | Core |
| Apply work health and safety regulations, codes and practices in the workplace | Core |
| Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply | Core |
| Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c. | Core |
| Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring | Core |
| Document and apply measures to control WHS risks associated with electrotechnology work | Core |
| Engage in appliance, business or computer equipment servicing work and competency development | Core |
| Establish the basic operating conditions of vapour compression systems - appliances | Core |
| Fabricate, assemble and dismantle utilities industry components | Core |
| Find and rectify faults in appliance control systems and devices | Core |
| Find and rectify faults in single phase motors and associated controls | Core |
| Find and rectify faults in three phase motors and associated controls | Core |
| Fix and secure electrotechnology equipment | Core |
| Locate and rectify faults in low voltage (LV) electrical equipment using set procedures | Core |
| Prepare and connect refrigerant tubing and fittings | Core |
| Recover, pressure test, evacuate, charge and leak test refrigerants - appliances | Core |
| Service clothes washing machines and dryers | Core |
| Service refrigeration appliances | Core |
| Service small electrical appliances and power tools | Core |
| Solve problems in ELV single path circuits | Core |
| Solve problems in low voltage refrigeration and air conditioning circuits | Core |
| Use drawings, diagrams, schedules, standards, codes and specifications | Core |
| Verify functionality and compliance of appliances | Core |
| Apply safety awareness and legal requirements for carbon dioxide refrigerant | Elective |
| Apply safety awareness and legal requirements for flammable refrigerants | Elective |
| Comply with scheduled and preventative maintenance program processes | Elective |
| Deliver a service to customers | Elective |
| Establish the basic operating conditions of air conditioning systems | Elective |
| Maintain documentation | Elective |
| Operate application software packages | Elective |
| Prepare to work safely in the construction industry | Elective |
| Provide basic instruction in the use of electrotechnology apparatus | Elective |
| Provide cardiopulmonary resuscitation | Elective |
| Provide First Aid | Elective |
| Provide quotations for installation or service jobs | Elective |
| Repair and service self-contained carbon dioxide refrigeration and heat pump systems | Elective |
| Resolve problems in post-mix refrigeration systems | Elective |
| Resolve problems in refrigerated beverage vending cabinets | Elective |
| Service and repair microwave ovens | Elective |
| Service and repair self-contained flammable refrigerants air conditioning and refrigeration systems | Elective |
| Service dishwasher machines | Elective |
| Service electrical heating appliances | Elective |
| Service gas heating appliances | Elective |
| Service room air conditioners | Elective |
| Source and purchase material/parts for installation or service jobs | Elective |
Job prospects
The Certificate III in Appliance Service sets you up for roles like these, but the skills you learn could take you even further.
-
Electrician (General)
ANZSCO 341111
Electricians (General) install, test, connect, commission, maintain and modify electrical equipment, wiring and control systems.
Recommended education level:
Certificate III or IV -
Airconditioning and Refrigeration Mechanic
ANZSCO 342111
Install, service and repair refrigeration and air-conditioning systems.
Recommended education level:
Certificate III or IV -
Electronic Equipment Trades Worker
ANZSCO 342313
Electronic Equipment Trades Workers install, maintain and repair electronic equipment and systems such as audio and visual reproduction equipment, home entertainment systems, computers and electronic security systems.
Recommended education level:
Certificate III or IV
Training providers delivering Certificate III in Appliance Service
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
-
TAFE QUEENSLAND (RTO code 0275)
Contact this provider
-
AXIAL TRAINING PTY LTD (RTO code 2437)
Government funding
- Skills Assure Supplier
Contact this provider
-
Energy Skills Solutions (RTO code 52257)
Contact this provider
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.