This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification provides competencies to manufacture, fit, assemble, erect, operate, test, fault find, alter and repair electrical equipment and includes electrical wiring work only if that work is associated with assembling, maintaining, terminating or altering the wiring between electrical components within a plant or machinery. An electrical fitter is not authorised to install any electrical wiring systems within an electrical installation as prescribed by definitions contained in AS/NZS 3000 Electrical installations (known as the Australian/New Zealand Wiring Rules)..
Electrical equipment means any appliance, article, accessory, wire, fitting, cable, conduit or apparatus that generates, uses, conveys or controls (or that is intended to generate, use, convey or control) electricity above extra-low voltage (ELV).
The skills and knowledge described in this qualification may require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).
Competency development activities in this qualification may be subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training through an Australian Apprenticeship, may be required.
Licensing, legislative and regulatory requirements that apply to this qualification can vary between states and territories. Some jurisdictions require that the qualification is completed as an apprenticeship to obtain an Electrical Occupational License. Relevant information must be sourced prior to commencing the qualification. Where required for Licencing, the certification documentation issued must indicate if the qualification was completed as an apprenticeship or Trades Recognition Australia (TRA) pathway.
-
Financial help
-
Government funding is available for this course. Check your eligibility for:
*To be eligible for this funding, you have to do an apprenticeship.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
To see how government funding could help to reduce the cost of your course, check your eligibility for funding.
-
-
On-the-job training
- Completing this course through an apprenticeship can help you to learn the skills you need.
This apprenticeship is available:
-
Entry requirements
This course doesn't have any entry requirements. It could be a good starting point for your career.
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Through apprenticeship:
4 years
- Through apprenticeship:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Apply environmentally and sustainable procedures in the energy sector | Core |
| Apply work health and safety regulations, codes and practices in the workplace | Core |
| Arrange circuits, control and protection for electrical installations | Core |
| Conduct compliance and functional verification of electrical apparatus and existing circuits | Core |
| Develop and connect electrical control circuits | Core |
| Document and apply measures to control WHS risks associated with electrotechnology work | Core |
| Fabricate, assemble and dismantle utilities industry components | Core |
| Fix and secure electrotechnology equipment | Core |
| Identify, shut down and restart systems with alternate supplies | Core |
| Isolate, test and troubleshoot low voltage electrical circuits | Core |
| Participate in electrical work and competency development activities | Core |
| Provide cardiopulmonary resuscitation | Core |
| Solve problems in direct current (d.c.) machines | Core |
| Solve problems in low voltage a.c. circuits | Core |
| Solve problems in magnetic and electromagnetic devices | Core |
| Solve problems in multiple path circuits | Core |
| Solve problems in single path circuits | Core |
| Terminate cables, cords and accessories for low voltage circuits | Core |
| Test and connect alternating current (a.c.) rotating machines | Core |
| Test and connect transformers | Core |
| Use drawings, diagrams, schedules, standards, codes and specifications | Core |
| Align and install traction lift equipment | Elective |
| Assemble and connect telecommunication frames and cabinets | Elective |
| Assemble and wire electrical rail signalling equipment | Elective |
| Assemble, enter and verify operating instructions in microprocessor equipped devices | Elective |
| Assemble, mount and connect control gear and switchgear | Elective |
| Attach HV flexible cables and plugs | Elective |
| Carry out basic repairs to electrical components and equipment | Elective |
| Conduct electrical tests on LV electrical machines | Elective |
| Conduct mechanical tests on electrical machines and components | Elective |
| Determine the explosion-protection requirements to meet a specified classified hazardous area | Elective |
| Develop, enter and verify discrete control programs for programmable controllers | Elective |
| Develop, enter and verify word and analogue control programs for programmable logic controllers | Elective |
| Diagnose and rectify faults in traction lift systems | Elective |
| Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring | Elective |
| Disconnect-reconnect 3.3 kV electric propulsion components of self-propelled earth moving vehicles | Elective |
| Disconnect-reconnect explosion-protected appliances and control devices connected to LV installation | Elective |
| Enter a classified hazardous area to undertake work related to electrical equipment | Elective |
| Establish the basic operating conditions of air conditioning systems | Elective |
| Establish the basic operating conditions of vapour compression systems | Elective |
| Evaluate and modify low voltage heating equipment and controls | Elective |
| Evaluate and modify low voltage lighting circuits, equipment and controls | Elective |
| Evaluate and modify low voltage socket outlets circuits | Elective |
| Fabricate and assemble bus bars | Elective |
| Find and rectify faults in appliance control systems and devices | Elective |
| Find and rectify faults in single phase motors and associated controls | Elective |
| Find and rectify faults in three phase motors and associated controls | Elective |
| Find and repair faults in LV d.c. electrical apparatus and circuits | Elective |
| Install and maintain cabling for multiple access to telecommunication services | Elective |
| Install and start up single head split air conditioning and water heating heat pump systems | Elective |
| Install explosion-protected equipment and associated apparatus and wiring systems | Elective |
| Install instrumentation and control apparatus and associated equipment | Elective |
| Install instrumentation and control cabling and tubing | Elective |
| Install refrigerant pipe work, flow controls and accessories | Elective |
| Install, modify and verify coaxial and structured communication copper cabling | Elective |
| Locate and rectify faults in low voltage (LV) electrical equipment using set procedures | Elective |
| Maintain and service traction lift systems and equipment | Elective |
| Maintain capacitor bank equipment | Elective |
| Maintain equipment associated with hazardous areas | Elective |
| Maintain insulating oil | Elective |
| Maintain operation of electrical marine equipment and systems | Elective |
| Maintain operation of electrical mining equipment and systems | Elective |
| Mount and wire control panel equipment | Elective |
| Overhaul and repair major switchgear and control gear | Elective |
| Perform high voltage field switching operation to a given schedule | Elective |
| Perform low voltage field switching operation to a given schedule | Elective |
| Perform rescue from a live low voltage panel | Elective |
| Perform substation switching operations to a given schedule | Elective |
| Place and connect electrical coils | Elective |
| Prepare and connect refrigerant tubing and fittings | Elective |
| Provide advice on effective and energy efficient lighting products | Elective |
| Provide advice on the application of energy efficient lighting for ambient and aesthetic effect | Elective |
| Recover and charge refrigerants | Elective |
| Repair and maintain mechanical components of electrical machines | Elective |
| Repair rail signalling power and control cables | Elective |
| Repairs basic electronic apparatus faults by replacement of components | Elective |
| Rewind LV direct current machines | Elective |
| Rewind single phase machines | Elective |
| Rewind three phase low voltage induction machines | Elective |
| Safely handle refrigerants and lubricants | Elective |
| Service clothes washing machines and dryers | Elective |
| Service electrical heating appliances | Elective |
| Service refrigeration appliances | Elective |
| Service small electrical appliances and power tools | Elective |
| Solve problems in density/level measurement components and systems | Elective |
| Solve problems in flow measurement components and systems | Elective |
| Solve problems in network equipment | Elective |
| Solve problems in network protection | Elective |
| Solve problems in pressure measurement components and systems | Elective |
| Solve problems in temperature measurement components and systems | Elective |
| Supervise repair and overhaul of explosion-protected equipment type flameproof (Ex d) | Elective |
| Supervise repair and overhaul of explosion-protected equipment type Group III ('t') | Elective |
| Supervise repair and overhaul of explosion-protected equipment type increased safety (Ex e) | Elective |
| Supervise repair and overhaul of explosion-protected equipment type intrinsically safe (Ex i) | Elective |
| Supervise repair and overhaul of explosion-protected equipment type pressurised (Ex p) | Elective |
| Supervise repair and overhaul of explosion-protected rotating machines | Elective |
| Supply effective and efficient lighting products for domestic and small commercial applications | Elective |
| Test copper rail signalling cables | Elective |
| Troubleshoot single phase input d.c power supplies | Elective |
| Use and maintain the integrity of a portable gas detection device | Elective |
| Use engineering applications software on personal computers | Elective |
| Use instrumentation drawings, specifications, standards and equipment manuals | Elective |
| Wind electrical coils | Elective |
Job prospects
The Certificate III in Electrical Fitting sets you up for roles like these, but the skills you learn could take you even further.
-
Electrician (General)
ANZSCO 341111
Electricians (General) install, test, connect, commission, maintain and modify electrical equipment, wiring and control systems.
Recommended education level:
Certificate III or IV
Training providers delivering Certificate III in Electrical Fitting
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
-
TAFE QUEENSLAND (RTO code 0275)
Government funding
- Skills Assure Supplier
Contact this provider
-
AUSINET (RTO code 41457)
Government funding
- Skills Assure Supplier
Contact this provider
-
TEC-NQ (RTO code 31444)
Government funding
- Skills Assure Supplier
Contact this provider
-
Australian Trade Training College (RTO code 31399)
Contact this provider
-
College of Electrical Training (RTO code 2394)
Contact this provider
-
Queensland Electrical Training (RTO code 30980)
Contact this provider
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.