This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification covers competencies in mandatory and contractual inspections of electrical systems and auditing of entities for compliance with electrical safety requirements.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
-
Financial help
-
Government funding is not available for this course.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
-
-
On-the-job training
- Apprenticeships and traineeships are not available for this course.
-
Entry requirements
This course has entry requirements. See more information at the National Training Register
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Qualification only:
6 months – 2 years
- Qualification only:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Compile and produce an energy sector detailed report | Core |
| Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase | Core |
| Conduct compliance inspection of single phase LV electrical installations | Core |
| Implement and monitor energy sector environmental and sustainable policies and procedures | Core |
| Implement and monitor energy sector WHS policies and procedures | Core |
| Participate in development and follow a personal competency development plan | Core |
| Carry out low voltage electrical field testing and report findings | Elective |
| Conduct compliance inspection of special LV electrical installations | Elective |
| Conduct detailed inspection of electrical installations for hazardous areas | Elective |
| Conduct site survey for grid-connected photovoltaic and battery storage systems | Elective |
| Conduct visual and close inspection of electrical installations for hazardous areas | Elective |
| Deliver a service to customers | Elective |
| Determine the explosion-protection requirements to meet a specified classified hazardous area | Elective |
| Develop compliance policies and plans to conduct an electrical contracting business | Elective |
| Develop electrical integrated systems | Elective |
| Diagnose and rectify faults in complex lift systems | Elective |
| Diagnose and rectify faults in traction lift systems | Elective |
| Enter a classified hazardous area to undertake work related to electrical equipment | Elective |
| Install and commission whole current electricity meters | Elective |
| Install and maintain emergency safety systems | Elective |
| Install photovoltaic power conversion equipment to grid | Elective |
| Install photovoltaic systems to power conversion equipment | Elective |
| Investigate and report on electrical incidents and causes | Elective |
| Maintain documentation | Elective |
| Maintain equipment associated with hazardous areas | Elective |
| Maintain operation of electrical marine equipment and systems | Elective |
| Maintain operation of electrical mining equipment and systems | Elective |
| Operate application software packages | Elective |
| Plan electrical installations with a low voltage demand up to 400 A per phase | Elective |
| Plan low voltage switchboard and control panel layouts | Elective |
| Plan the electrical installation of integrated systems | Elective |
| Prepare to work safely in the construction industry | Elective |
| Provide cardiopulmonary resuscitation | Elective |
| Select and arrange equipment for special LV electrical installations | Elective |
| Set up and place LV electrical apparatus and associated circuits into service | Elective |
| Use engineering applications software on personal computers | Elective |
| Use instrumentation drawings, specifications, standards and equipment manuals | Elective |
| Verify compliance and functionality of special LV electrical installations | Elective |
Job prospects
The Certificate IV in Installation Inspection and Audits sets you up for roles like these, but the skills you learn could take you even further.
-
Electrician (General)
ANZSCO 341111
Electricians (General) install, test, connect, commission, maintain and modify electrical equipment, wiring and control systems.
Recommended education level:
Certificate III or IV
Training providers delivering Certificate IV in Installation Inspection and Audits
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
-
College of Electrical Training (RTO code 2394)
Contact this provider
-
TAFE NSW (RTO code 90003)
Contact this provider
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.