This page is updated when information changes, but it's always best to talk to your training provider to confirm course details before you enrol.
Overview
This qualification provides competencies to select, install, set up, test, fault find, repair and maintain renewable energy (RE) electrical systems and equipment in buildings and premises.
It includes requirements and competencies to select, install, set up, test, fault find, repair and maintain stand-alone RE equipment and systems.
There are skills and knowledge covered in this qualification that require a licence or permit to practice.
-
Financial help
-
Government funding is not available for this course.
-
-
Cost
Course costs can vary by provider and location. Ask your training provider for a cost estimate.
-
VET Student Loans are not available
-
You may need to pay for equipment or materials.
-
-
On-the-job training
- Apprenticeships and traineeships are not available for this course.
-
Entry requirements
This course has entry requirements. See more information at the National Training Register
-
Duration
You complete this course when you’ve learned the skills, not after a set amount of time. The times shown are estimates.
- Qualification only:
6 months – 2 years
- Qualification only:
-
Delivery options
You may be able to access this training in these ways:
Course content
This course is made up of units.
All courses have core units—these are mandatory for completing the course. Most courses also have elective units, which you can choose from to suit your needs and interests. Not all training providers offer every elective, so check with your provider to find out which electives they can offer you.
For more information about course content, talk to your training provider or visit the National Training Register.
| Unit | Unit type |
|---|---|
| Apply safe work practices in the rooftop solar industry | Core |
| Compile and produce an energy sector detailed report | Core |
| Conduct site survey for grid-connected photovoltaic and battery storage systems | Core |
| Implement and monitor energy sector WHS policies and procedures | Core |
| Install battery storage to power conversion equipment | Core |
| Install photovoltaic systems to power conversion equipment | Core |
| Maintain renewable energy (RE) apparatus | Core |
| Apply methods to maintain currency of industry developments | Elective |
| Assemble, enter and verify operating instructions in microprocessor equipped devices | Elective |
| Assess energy loads and uses for energy efficiency in commercial facilities | Elective |
| Assess energy loads and uses for energy efficiency in industrial properties and enterprises | Elective |
| Assess household energy use and efficiency improvements | Elective |
| Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase | Elective |
| Conduct compliance inspection of single phase LV electrical installations | Elective |
| Conduct compliance inspection of special LV electrical installations | Elective |
| Conduct site survey for off-grid photovoltaic/generating set systems | Elective |
| Coordinate maintenance of renewable energy (RE) apparatus and systems | Elective |
| Design grid-connected battery storage systems | Elective |
| Design grid-connected photovoltaic power supply systems | Elective |
| Design micro-hydro systems | Elective |
| Design off-grid photovoltaic/generating set systems | Elective |
| Design renewable energy heating systems | Elective |
| Design wind energy systems | Elective |
| Develop an electrical integrated system interface for access through a touch screen | Elective |
| Develop compliance policies and plans to conduct an electrical contracting business | Elective |
| Develop electrical integrated systems | Elective |
| Develop strategies to address sustainability issues for electrical installations | Elective |
| Develop, enter and verify discrete control programs for programmable controllers | Elective |
| Develop, enter and verify programs in supervisory control and data acquisition systems | Elective |
| Develop, enter and verify word and analogue control programs for programmable logic controllers | Elective |
| Diagnose and rectify faults in renewable energy (RE) control systems | Elective |
| Estimate electrotechnology projects | Elective |
| Fault find and repair grid-connected photovoltaic power supply systems | Elective |
| Fault find and repair off-grid photovoltaic/generating set systems to an electrical installation | Elective |
| Identify and isolate multiple supply systems | Elective |
| Identify, shut down and restart systems with alternate supplies | Elective |
| Install and commission whole current electricity meters | Elective |
| Install and maintain cabling for multiple access to telecommunication services | Elective |
| Install and maintain micro hydro energy systems to power conversion equipment | Elective |
| Install and maintain wind energy systems to power conversion equipment | Elective |
| Install and replace low voltage current transformer metering | Elective |
| Install battery storage equipment power conversion equipment to grid | Elective |
| Install off-grid power conversion equipment to electrical installation | Elective |
| Install photovoltaic power conversion equipment to grid | Elective |
| Investigate and report on electrical incidents and causes | Elective |
| Maintain safety and tidiness of remote area power supply systems | Elective |
| Operate application software packages | Elective |
| Plan electrical installations with a low voltage demand up to 400 A per phase | Elective |
| Plan the electrical installation of integrated systems | Elective |
| Prepare engineering drawings using manual drafting and CAD for electrotechnology applications | Elective |
| Promote sustainable energy practices | Elective |
| Provide basic instruction in the use of electrotechnology apparatus | Elective |
| Provide photometric data for illumination system design | Elective |
| Provide quotations for installation or service jobs | Elective |
| Select and arrange equipment for special LV electrical installations | Elective |
| Source and purchase material/parts for installation or service jobs | Elective |
| Use engineering applications software on personal computers | Elective |
| Verify compliance and functionality of special LV electrical installations | Elective |
| Work safely with remote area power supply systems | Elective |
Job prospects
The Certificate IV in Electrical - Renewable Energy sets you up for roles like these, but the skills you learn could take you even further.
-
Electrical Engineering Technician
ANZSCO 312312
Electrical Engineering Technicians conduct tests of electrical systems, prepare charts and tabulations, and assist in estimating costs in support of Electrical Engineers and Engineering Technologists.
Recommended education level:
Diploma, Advanced Diploma or Associate Degree -
Electrician (General)
ANZSCO 341111
Electricians (General) install, test, connect, commission, maintain and modify electrical equipment, wiring and control systems.
Recommended education level:
Certificate III or IV -
Electrician (Special Class)
ANZSCO 341112
Electricians (Special Class) service and repair intricate and complex electrical and electronic circuitry.
Recommended education level:
Certificate III or IV -
Lift Mechanic
ANZSCO 341113
Lift Mechanics design, install, maintain, service and repair electric and hydraulic passenger and freight lifts, escalators, moving walkways and other lift equipment.
Recommended education level:
Certificate III or IV -
Airconditioning and Refrigeration Mechanic
ANZSCO 342111
Install, service and repair refrigeration and air-conditioning systems.
Recommended education level:
Certificate III or IV -
Electrical Linesworker
ANZSCO 342211
Electrical Linesworkers install, maintain, repair and patrol electrical sub-transmission and distribution systems.
Recommended education level:
Certificate III or IV -
Technical Cable Jointer
ANZSCO 342212
Technical Cable Jointers join insulated electric power cables installed in underground conduits and trenches, and prepare cable terminations for connection to electrical equipment and overhead lines.
Recommended education level:
Certificate III or IV -
Business Machine Mechanic
ANZSCO 342311
Business Machine Mechanics install, maintain and repair electronic business equipment such as multi-function devices, photocopiers, scanners, fax machines and cash registers.
Recommended education level:
Certificate III or IV -
Communications Operator
ANZSCO 342312
Communications Operators transmit and receive radio messages by use of morse code, voice and radio teletype.
Recommended education level:
Certificate III or IV -
Electronic Equipment Trades Worker
ANZSCO 342313
Electronic Equipment Trades Workers install, maintain and repair electronic equipment and systems such as audio and visual reproduction equipment, home entertainment systems, computers and electronic security systems.
Recommended education level:
Certificate III or IV -
Electronic Instrument Trades Worker (General)
ANZSCO 342314
Electronic Instrument Trades Workers (General) install, modify, maintain and repair electronic instruments and control systems.
Recommended education level:
Certificate III or IV -
Electronic Instrument Trades Worker (Special Class)
ANZSCO 342315
Electronic Instrument Trades Workers (Special Class) install, modify, maintain and repair complex electronic instruments and control systems which involve a combination of electrical, electronic, mechanical, hydraulic and pneumatic principles.
Recommended education level:
Certificate III or IV -
Cabler (Data and Telecommunications)
ANZSCO 342411
Cablers (Data and Telecommunications) install internal telecommunications and data cabling, equipment and peripherals for computer networks, telephony, cable television and monitored security and fire alarms.
Recommended education level:
Certificate III or IV -
Telecommunications Cable Jointer
ANZSCO 342412
Telecommunications Cable Jointers joint, terminate and repair copper and fibre optic telecommunications cables installed in underground pipes, trenches and overhead systems.
Recommended education level:
Certificate III or IV -
Telecommunications Linesworker
ANZSCO 342413
Telecommunications Linesworkers install, maintain and repair external telecommunication equipment such as aerial lines, conduits and underground cables, radio and mobile phone antennae, and limited items of terminal equipment.
Recommended education level:
Certificate III or IV -
Telecommunications Technician
ANZSCO 342414
Telecommunications Technicians install, maintain and repair telecommunications equipment and appliances, such as telephones, mobile telephones, switchboards and data transmission equipment, in homes, businesses, telephone exchanges and other network sites.
Recommended education level:
Certificate III or IV
Training providers delivering Certificate IV in Electrical - Renewable Energy
It's a good idea to research multiple training providers to make sure you're getting the right training for you.
-
ELECTRO GROUP TRAINING QUEENSLAND LTD (RTO code 30185)
Contact this provider
-
Project Management Vision Pty Ltd (RTO code 52698)
Contact this provider
-
Resolute Training Pty Ltd (RTO code 45544)
Contact this provider
-
School of Engineering in Australia (RTO code 51178)
Contact this provider
-
Skillbuild Pty Ltd (RTO code 70059)
Contact this provider
-
SUPERIOR TRAINING CENTRE PTY LTD (RTO code 41122)
Contact this provider
-
Volt Edge (RTO code 32137)
Contact this provider
How to enrol in this course
To enrol, choose a training provider that offers this course. You can see provider details on this page.
When you find one that you think suits you, visit their website or contact them directly to confirm details like start dates, fees, funding, delivery locations and delivery options.
The provider will guide you through the enrolment process.
How do apprenticeships and traineeships work?
Apprenticeships and traineeships let you combine hands-on work experience with training. You’ll gain job-ready skills and earn an income while you complete a qualification.
As an apprentice or a trainee, you work with an employer while completing your training. Most of your time is spent learning on the job, with some classroom or online training to support the skills you're developing in the workplace.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Find out more about apprenticeships and traineeships.
See more information about the apprenticeship or traineeship you’re interested in pursuing on the Queensland Training Information Service.
How long will this course take?
This course is competency-based training, which means you progress as you demonstrate your skills and knowledge, rather than in a set amount of time.
The duration shown here is an estimate for full-time study based on how long most people take to complete the course. You may finish earlier than other people, or it may take you a bit longer.
If you’ve already completed training or have worked in a relevant area, you could get credits or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the time needed for training.
Duration for apprenticeships and traineeships
Apprenticeships and traineeships take longer than doing the qualification on its own, but you learn valuable hands-on skills.
For some jobs, you may need to do an apprenticeship or traineeship before you are allowed to work as a qualified tradesperson. For example, you need to do an apprenticeship if you want to work as a licensed electrician.
Learn about how courses are delivered
Different courses have different delivery options. Consider your needs when you’re researching courses. Some courses may be delivered entirely online or partially online. Others may be delivered in a classroom.
Some courses, like those delivered through apprenticeships and traineeships, are mostly based in the workplace but with some classroom or online study.
If a certain type of delivery is important to you, talk to your provider before you enrol to make sure they offer that delivery option.
How to reduce the cost of your course
There are lots of ways you can reduce the cost of your course.
- The government could partly or fully cover the cost of your course. See information about financial help and government funding on this page.
- The government also offers funding for some costs related to your course.
- If you’ve already completed training or have worked in a relevant area, you could get a cost credit or recognition of prior learning. This can reduce the training you need to complete a qualification, which could reduce the cost.
Learn about financial help and government funding
The main cost of training is usually the course fees, which vary depending on things like which course and training provider you choose.
You may be able to get your training for free or at a reduced cost, or you could get help with paying for training-related costs. You can also pay for some courses with a VET Student Loan.
Find out more about getting help paying for your training or check if you're eligible.
What are entry requirements?
Some courses have conditions you need to meet before you can enrol in the course. They help make sure you have the right background or skills for the training.
Entry requirements might include a certain education level, skills or knowledge, work status, or experience.